Posts

2018 MIRTEC MV-7 OMNI AOI

NEVER RAN IN PRODUCTION LINE
 
Make:  MIRTEC
Model: MV-7 OMNI 
Reference No.:   174CC
S/N: 
Year:  2018
Details:
 
 
Used for training only, was not used in production line.  Like New condition with just a couple of hours. 

In-Line 2D/3D AOI Machine:

  • FIVE CAMERA 2D/3D In-Line AOI System
  • Exclusive OMNI-VISION® 2D/3D Inspection Technology
  • Exclusive FIFTEEN MEGA PIXEL ISIS® Vision System
  • 10 Micron / Precision TELECENTRIC COMPOUND LENS
  • Advanced 3D DIGITAL MULTI-FREQUENCY MOIRÉ Design
  • Superior Lifted Lead Detection for Gull Wing Devices
  • Co-planarity inspection of chips, BGAs and other height sensitive devices
  • Integrated Ten Mega Pixel SIDE-VIEWER® Camera System
  • Superior SIX PHASE Color Lighting Technology
  • Precision AC Servo Drive Motor System
  • Extremely Simple Programming and Operation
 
 
 
Condition:  Complete & Operational >> Never ran in production line, ran only one program for training.
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:
Purchase or Ask About This Equipment
* indicates required field

Contact Cardinal Circuit at the number above or email sales@cardinalcircuit.com for additional information or inquiries. Fast response, within a hour or less.

Speedline Aquastorm 100C In-Line Aqueous PCB Cleaning System with REsys Water Recycling System

Make:  Speedline
Model: Aquastorm 100C In-Line Aqueous with REsys Water Recycling System
Reference No.:   173CC
S/N: ASIC-20005
Vintage:  2009
Details:
 
 

 

  • EQUIPMENT DESCRIPTION – 20.5″
  • Wide Mesh Weave Conveyor
  • Max Temperature: 180-300 Deg F
  • Max Product Width: 20″ (508 mm) 
  • Maximum Weight Capacity: 25 lb/ft (11.3 kg)
  • Throat Height (Product Clearance): 4″ (101.6 mm)
  • Voltage 480v
  • Dimensions – 200x70x80 – 5000 lbs 
REsys Closed Loop Deionized Water Recycling System 

Recycling offers the following savings;

  • Water Usage:  The only water required is what is lost in evaporation, drag-out, and isolation rinses.
  • DI Water Cost:  PCB in-line cleaner effluent is typically 10X less contaminated than typical city or well water.  Exceptions certainly exist, the use of temporary water soluble mask or other process chemicals will effect contamination levels.
  • Energy Cost:  Heat recovery is inherent to the water recycling process.  Much less energy is required to maintain hot water in the recirculating tanks onboard the cleaning systems.
  • Municipal Treatment Cost:  In applications where zero discharge is attainable, sewer assessments can be minimized or even eliminated.
 
Contact Cardinal Circuit at the number above or email sales@cardinalcircuit.com for additional information or inquiries.
 
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:
Purchase or Ask About This Equipment
* indicates required field

Speedline Electrovert Omni Excel 7 Reflow Oven

Make:  Speedline
Model: Electrovert Omni Excel 7
Reference No.:   172CC
Vintage:  2008
Details:
  • 7 Heating Zones (Top & Bottom Heaters)
  • 2 Cooling Zones
  • Edge & Mesh Transport
  • Power: 480 VAC; 74.5A; 60Hz; 3 Phase
  • Machine Dimensions: 202″ x 60″ x 58″
  • Lead Free
  • Combo Conveyor
 
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
 
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Speedline Momentum Elite 2008

Make:  Speedline
Model: Momentum Elite
Reference No.:   172CC
Vintage:  2008
Details:
  • Automated Paste Dispenser (supports 6 oz. & 12 oz. cartridges)
  • Laser Paste Bead Height Sensor
  • Adjustable Stencil Shelves
  • (Note: Supports stencils with outside dimension of 23″ or larger) 
  • Pad Coverage Inspection EA
  • Contrast Based 2D Inspection (paste on pad)
  • Momentum Elite Package
  • 6 Second Cycle Time
  • Triple Track Conveyor System (66″ Track Length). With Servo Driven Vision X, Y and Z Axes.
 
Programmable squeegee print head
Stencil Wiper with Vacuum and Solvent
Digital probe with telecentric optics, ultrasonic board stop sensor, and LED flash lighting
IR Light – Enhances Inspection Recognition for OSP Boards
+/- 12.5 micron total process alignment repeatability and +/- 25.0 micron wet print accuracy
CanOpen control architecture for parallel processing
Automatic Stencil Positioning
Programmable Board Stop (Hardstop and Non-Contact Stop included)
Centernest clamping includes: Fixed top clamps and centernest vacuum hold-down
Front Fixed Single Tracks
Board thickness range of 0.2mm to 5mm
3mm board edge clearance capability
50.8mm X 50.8mm (2″ X 2″) to 609.6mm X 508mm (24″ X 20″) board size capability (X, Y)
Windows XP based Benchmark GUI software (both registered trademarks)
737mm X 737mm (29″ X 29″) Stencil chase
Signal Light Tower
17″ flat panel display
PC controlled with keyboard and trackball interface
SPC data collection
SMEMA handshake, Ethernet communication and CE certification
208V / 240V single phase power
GridLoc System
  
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:
Purchase or Ask About This Equipment
* indicates required field

Contact Cardinal Circuit at the number above or email sales@cardinalcircuit.com for additional information or inquiries. Fast response, within a hour or less.

TestEquity Temperature Chamber

Make: TestEquity
Model:  Temperature Chamber
Reference No.:   171CC
Details:

Temperature, Lowest:  -35°C
Temperature, Highest:  +175°C
LN2 Boost Cooling:  No
Interior Volume:  27 Cu Ft
Input Voltage:  208V, 60Hz, 3 PH

  • -35°C to +175°C Temperature Range (opt. to +205°C)
  • 27 Cu Ft Workspace, 40 W x 32 H x 36.5 D (765 liters)
  • Choice of Original F4 Controller or Optional F4T Touch Screen Controller
  • High/Low Limit Control and Alarm
  • Viewing Window & Interior Light
  • 4″ Access Ports on Left & Right Side
  • Non-CFC Single-Stage Refrigeration
  • Scroll Compressors for Quiet and Efficient Operation
  • 3 Year Parts, 1 Year Labor warranty
  • Fast Delivery From Stock
  • Made by TestEquity in Moorpark, California

450 Universal Gold Feeders

Manufacturer:    Universal
Model
D.O.M.:
Reference No.:   G07

Specifications:

Size
Count
8
338
12
47
16
27
24
22
32
17
44
22
56
4
72
2
88
1
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

Invalid Displayed Gallery

Universal Instruments Push Conveyor Multi-Magazine Loader

Make: Universal Instruments
Model:  Push Conveyor Multi-Magazine Loader
Reference No.:   166CC
Details:
 
Universal Instruments Push Conveyor
for end of the line multi-magazine loader
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:
 

Universal Instruments Transfer Conveyors (x 5)

Make: Universal Instruments
Model:  Transfer Conveyor
Reference No.:   159CC
Details:
 
Universal Instruments Transfer Conveyor (x 4)
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

Conveyor Technologies Board Destacker

Make: Conveyor Technologies
Model:  Vacuum Bare Board Destacker
Reference No.:   157CC
Details:
 
Conveyor Technologies vacuum bare board destacker
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:
 

Universal GC120

Make: Universal 
Model:  GC120
Reference No.:   154CC
Details:
 
 
For more information on this piece of equipment contact Brad regarding GC120 reference number 154CC.
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos: