Posts

2018 MIRTEC MV-7 OMNI AOI

NEVER RAN IN PRODUCTION LINE
 
Make:  MIRTEC
Model: MV-7 OMNI 
Reference No.:   174CC
S/N: 
Year:  2018
Details:
 
 
Used for training only, was not used in production line.  Like New condition with just a couple of hours. 

In-Line 2D/3D AOI Machine:

  • FIVE CAMERA 2D/3D In-Line AOI System
  • Exclusive OMNI-VISION® 2D/3D Inspection Technology
  • Exclusive FIFTEEN MEGA PIXEL ISIS® Vision System
  • 10 Micron / Precision TELECENTRIC COMPOUND LENS
  • Advanced 3D DIGITAL MULTI-FREQUENCY MOIRÉ Design
  • Superior Lifted Lead Detection for Gull Wing Devices
  • Co-planarity inspection of chips, BGAs and other height sensitive devices
  • Integrated Ten Mega Pixel SIDE-VIEWER® Camera System
  • Superior SIX PHASE Color Lighting Technology
  • Precision AC Servo Drive Motor System
  • Extremely Simple Programming and Operation
 
 
 
Condition:  Complete & Operational >> Never ran in production line, ran only one program for training.
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:
Purchase or Ask About This Equipment
* indicates required field

Contact Cardinal Circuit at the number above or email sales@cardinalcircuit.com for additional information or inquiries. Fast response, within a hour or less.

Speedline Aquastorm 100C In-Line Aqueous PCB Cleaning System with REsys Water Recycling System

Make:  Speedline
Model: Aquastorm 100C In-Line Aqueous with REsys Water Recycling System
Reference No.:   173CC
S/N: ASIC-20005
Vintage:  2009
Details:
 
 

 

  • EQUIPMENT DESCRIPTION – 20.5″
  • Wide Mesh Weave Conveyor
  • Max Temperature: 180-300 Deg F
  • Max Product Width: 20″ (508 mm) 
  • Maximum Weight Capacity: 25 lb/ft (11.3 kg)
  • Throat Height (Product Clearance): 4″ (101.6 mm)
  • Voltage 480v
  • Dimensions – 200x70x80 – 5000 lbs 
REsys Closed Loop Deionized Water Recycling System 

Recycling offers the following savings;

  • Water Usage:  The only water required is what is lost in evaporation, drag-out, and isolation rinses.
  • DI Water Cost:  PCB in-line cleaner effluent is typically 10X less contaminated than typical city or well water.  Exceptions certainly exist, the use of temporary water soluble mask or other process chemicals will effect contamination levels.
  • Energy Cost:  Heat recovery is inherent to the water recycling process.  Much less energy is required to maintain hot water in the recirculating tanks onboard the cleaning systems.
  • Municipal Treatment Cost:  In applications where zero discharge is attainable, sewer assessments can be minimized or even eliminated.
 
Contact Cardinal Circuit at the number above or email sales@cardinalcircuit.com for additional information or inquiries.
 
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:
Purchase or Ask About This Equipment
* indicates required field

Speedline Electrovert Omni Excel 7 Reflow Oven

Make:  Speedline
Model: Electrovert Omni Excel 7
Reference No.:   172CC
Vintage:  2008
Details:
  • 7 Heating Zones (Top & Bottom Heaters)
  • 2 Cooling Zones
  • Edge & Mesh Transport
  • Power: 480 VAC; 74.5A; 60Hz; 3 Phase
  • Machine Dimensions: 202″ x 60″ x 58″
  • Lead Free
  • Combo Conveyor
 
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
 
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Speedline Momentum Elite 2008

Make:  Speedline
Model: Momentum Elite
Reference No.:   172CC
Vintage:  2008
Details:
  • Automated Paste Dispenser (supports 6 oz. & 12 oz. cartridges)
  • Laser Paste Bead Height Sensor
  • Adjustable Stencil Shelves
  • (Note: Supports stencils with outside dimension of 23″ or larger) 
  • Pad Coverage Inspection EA
  • Contrast Based 2D Inspection (paste on pad)
  • Momentum Elite Package
  • 6 Second Cycle Time
  • Triple Track Conveyor System (66″ Track Length). With Servo Driven Vision X, Y and Z Axes.
 
Programmable squeegee print head
Stencil Wiper with Vacuum and Solvent
Digital probe with telecentric optics, ultrasonic board stop sensor, and LED flash lighting
IR Light – Enhances Inspection Recognition for OSP Boards
+/- 12.5 micron total process alignment repeatability and +/- 25.0 micron wet print accuracy
CanOpen control architecture for parallel processing
Automatic Stencil Positioning
Programmable Board Stop (Hardstop and Non-Contact Stop included)
Centernest clamping includes: Fixed top clamps and centernest vacuum hold-down
Front Fixed Single Tracks
Board thickness range of 0.2mm to 5mm
3mm board edge clearance capability
50.8mm X 50.8mm (2″ X 2″) to 609.6mm X 508mm (24″ X 20″) board size capability (X, Y)
Windows XP based Benchmark GUI software (both registered trademarks)
737mm X 737mm (29″ X 29″) Stencil chase
Signal Light Tower
17″ flat panel display
PC controlled with keyboard and trackball interface
SPC data collection
SMEMA handshake, Ethernet communication and CE certification
208V / 240V single phase power
GridLoc System
  
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:
Purchase or Ask About This Equipment
* indicates required field

Contact Cardinal Circuit at the number above or email sales@cardinalcircuit.com for additional information or inquiries. Fast response, within a hour or less.

TestEquity Temperature Chamber

Make: TestEquity
Model:  Temperature Chamber
Reference No.:   171CC
Details:

Temperature, Lowest:  -35°C
Temperature, Highest:  +175°C
LN2 Boost Cooling:  No
Interior Volume:  27 Cu Ft
Input Voltage:  208V, 60Hz, 3 PH

  • -35°C to +175°C Temperature Range (opt. to +205°C)
  • 27 Cu Ft Workspace, 40 W x 32 H x 36.5 D (765 liters)
  • Choice of Original F4 Controller or Optional F4T Touch Screen Controller
  • High/Low Limit Control and Alarm
  • Viewing Window & Interior Light
  • 4″ Access Ports on Left & Right Side
  • Non-CFC Single-Stage Refrigeration
  • Scroll Compressors for Quiet and Efficient Operation
  • 3 Year Parts, 1 Year Labor warranty
  • Fast Delivery From Stock
  • Made by TestEquity in Moorpark, California

Pillarhouse Jade S-200

Make: Pillarhouse
Model:  Jade S-200
DOM: Vintage 2009
Reference No.:   170CC
Details:

Product installation requirements:

Facilities: 208V – 250V 50/60Hz 4kVA
Dimms: 55″ x 40″ x 53″

Configuration

• Universally Adjustable Tooling Carrier 
• Inerted Nitrogen System 
• Lead Free Capability (Titanium solder pot and pump assembly) 
• Solder Wire Feeder with Solder bath level sensor 
• Drop Jet Fluxer 
• Programming Camera 
• PillarCOM Windows Software 
• Internal Fume Extraction
• Integral PC with Machine Mounted Flat Screen Monitor 


Description

As part of the entry-level philosophy for this system, a low maintenance solder bath and pump mechanism has been developed which moves in three axes of movement whilst not limiting access to the PCB. Solder is applied using proven technology through our AP nozzle design or custom specialised nozzles, incorporating patented spiral solder return to bath technology offering reduced solder balling potential.

As with all Pillarhouse systems, the soldering process is enhanced by a hot Nitrogen curtain which provides an inert atmosphere. This method of soldering also assists in the prevention of oxidisation and provides a local preheat to the joint, thus reducing thermal shock to localised components.

The Jade MKII is controlled by a PC, through PillarCOMM, a Windows® based ‘Point & Click’ interface with PCB image display.  Additionally, our PillarPAD offline package allows the operator to produce programs independently from the machine using Gerber data.


Specifications

Height: 1403mm / 55” – excluding light stack
Width: 1000mm / 40“
Depth: 1351mm / 53”
Board size: 457mm x 508mm / 18”x 20” (larger PCB size available upon request)
Edge clearance: Above / below 3mm
Height clearance: Above / below 40mm nominal
Above 190mm – special application
Solder: Most commonly used solder types – including lead-free
Solder pot capacity: 8kg
Applicators: AP style – 2.5mm to 16mm dia.
   Extended AP style – 2.5mm to 20mm dia.
   Micro nozzle – 1.5mm to 2.5mm
   Jet-Tip style – 6mm to 20mm dia.
   Jet-Wave nozzle – up to 25mm width
   Special dedicated nozzles available upon request
Flux: Low maintenance Drop-Jet system. Low solids (below 8%), no clean flux, pressurised and inerted system, optional water soluble system available
X, Y & Z Axis resolution: 0.1mm
Repeatability: +/- 0.05mm
Nitrogen usage: 35 litres gas/min. 5 bar pressure
Nitrogen purity: 99.995% or better
Air supply pressure: 5 bar / 72 psi
Power supplies: Single phase + PE
Voltage: 208V – 250V
Frequency: 50/60Hz
Power: 4kVA
Power with IR preheat: 6.5kVA – Top-side
   8kVA – Top with bottom-side ring heater
Transport: Hand load
Tooling: Integral adjustable board guides, includes finger extensions and board clamps
Programming: PillarCOMM Windows based ‘Point & Click’ interface

Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

450 Universal Gold Feeders

Manufacturer:    Universal
Model
D.O.M.:
Reference No.:   G07

Specifications:

Size
Count
8
338
12
47
16
27
24
22
32
17
44
22
56
4
72
2
88
1
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

Invalid Displayed Gallery

Conveyor Technologies Transfer Conveyor (x5)

Make: Conveyor Technologies
Model:  Transfer Conveyor
Reference No.:   161CC
Details:
 
Conveyor Technologies Transfer Conveyor/s (x5)
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

Cyberoptics QX500

Make: Cyberoptics
Model:  QX500
Reference No.:   151CC
Details:

QX500™ | Optimum Performance At Astonishing Speed

The multi-award winning QX500™ embraces CyberOptics unique image acquisition solution – Strobed Inspection Module (SIM) and is capable of inspecting 01005 components and larger at 200cm²/sec, securely positioning itself as the fastest area-scanning Automated Optical Inspection system in the industry. The QX500™ uses white strobed lighting, that consists of dual fixed angle lighting providing a superb image for defect review. You can further enhance component features by choosing a combination of lighting. QX500™ is designed to provide the IDEAL platform that can be integrated in assembly lines which manufacture memory modules, notebook PCS, mobile phones, automotive products, and other industrial electronic assemblies.

Key Features & Benefits

  • Fast, on-the-fly inspection with SIM (Strobed Inspection Module)
  • Edge for inspecting ‘Anything’ with SAM (Statistical Appearance Modeling) Technology
  • Lowest False Call Rate
  • Simple, fast programming with AI² (Autonomous Image Interpretation) Technology
  • Comprehensive SPC charts with CyberReport™
Specifications QX500™ QX500-L™ QX500-D™
Board Width 50 x 308 mm 50 x 510 mm 50x 300mm (dual lane mode)
50x590mm (single lane mode)
Board Length 50 x 457 mm 50 x 510 mm 50x480mm (dual lane mode)
50x510mm (single lane mode)
Resolution 17µm pixel size    
Inspection Speed 200 cm²/sec

Product Brochure: http://cyberoptics.com/pdf/AOI/QX500/QX500-8015885-REV_F.pdf
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos: