Automated Optical Inspection equipment

Posts

2014 MIRTEC MV-7 OMNI AOI

NEVER RAN IN PRODUCTION LINE
 
Make:  MIRTEC
Model: MV-7 OMNI 
Reference No.:   174CC
S/N: 
Year:  2014
Details:
 
 
Used for training only, was not used in production line.  Like New condition with just a couple of hours. 

In-Line 2D/3D AOI Machine:

  • FIVE CAMERA 2D/3D In-Line AOI System
  • Exclusive OMNI-VISION® 2D/3D Inspection Technology
  • Exclusive FIFTEEN MEGA PIXEL ISIS® Vision System
  • 10 Micron / Precision TELECENTRIC COMPOUND LENS
  • Advanced 3D DIGITAL MULTI-FREQUENCY MOIRÉ Design
  • Superior Lifted Lead Detection for Gull Wing Devices
  • Co-planarity inspection of chips, BGAs and other height sensitive devices
  • Integrated Ten Mega Pixel SIDE-VIEWER® Camera System
  • Superior SIX PHASE Color Lighting Technology
  • Precision AC Servo Drive Motor System
  • Extremely Simple Programming and Operation
  • The machine is a 2014 fully loaded with the same hardware and software of a 2017 unit
  • The only difference is the lighting as now Mirtec has an next generation Blue LED DLP

o            This unit has LCoS Moire (Liquid Crystal on Silicone)

o            There are over 500 units in the field with this config

o            The unit is fully functional and only ran occasionally as a demo

 

 

MV-7 OMNI   3D IN LINE AOI MACHINE WITH OMNI-VISION

 

MV-7-15MP-ISIS              15Mega Pixel @ 10um/pixel

MV-7-OMNI-VISION       Digital multi-frequency quad Moiré 3D system

MV-7-OMNI QHD             Quantum Hight Definition (QHD) option

MV-7-SVS-10MEG           10 Mega Pixel Side View Camera System

MV-7-OLTT                         MV-7 Off-line Teach Tool Software

MV-7-TRRS                         Remote Repair Software

 
 
 
Condition:  Complete & Operational >> Never ran in production line, ran only one program for training.
Location & Shipping:  Canada/ FOB Origin
Actual Machine Photos:

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

YesTech NORDSON AOI #3

YesTech NORDSON AOI

Manufacturer:  YesTech
Model:  NORDSON AOI
Reference No.:   116CC
Specifications:

Top Down Standard Camera:  Yes
Top Down High Meg. Camera:  Yes
4 Side Angle Cameras:  Yes
Red Light:  Yes
White Light:  Yes
RGB Light:  Yes

Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

YesTech NORDSON AOI #2

YesTech NORDSON AOI

Manufacturer:  YesTech
Model:  NORDSON AOI
Reference No.:   115CC
Specifications:

Top-Down Camera 5 MP Color Camera
Angle Camera 4 Side Angle Cameras
Lighting Fusion (RGB) multiangle LED + White LED Lighting
Minimum Component Size 0201
Resolution  2448×2048, 12 micron pixel size

Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

Yestech YTV2050 AOI System

Yestech Vision Inspection System Features & Benefits

Manufacturer:    Yestech
Model:   YTV2050
D.O.M.:   2005
Reference No.:   G17

Specifications:

  • Inline automated optical inspection system
  • Adjustable conveyor
  • Camera indexing head
  • Full coverage at high resolution
  • 22” x 20” PCB size capability
  • Top-down thin camera
  • 4 side camera viewing technology
  • Color megapixel cameras with 1.3” FOV
  • Vision processor board set
  • PCB inspection software
  • Windows user interface
  • Conveyor board clamp kit
  • Pneumatic support kit
  • High mag camera

Located at customer site in PA

Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Click images below for enlarged view of this Yestech YTV Automated Optical Inspection System

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

 

Christopher NSpec14 Desktop AOI

NSpec-14 Tabletop AOI Features & Benefits

Manufacturer:    Christopher / Marantz
Model:   NSpec 14
D.O.M.:
Reference No.:   749

Specifications:

  • Automated image inspector
  • Apply G4 Macintosh
  • 8W fluorescent right light
  • A. V.A cross-platform networking solution
  • Defects detected:
    • Missing components
    • Skew component polarity
    • Offset
    • Bridging
    • DIP switch position
    • Component type
  • 29” wide x 30” deep x 12” tall
  • Electrical: 110-240V 60Hz
  • Positional accuracy +/- 0.05mm
  • Table clearance 35/35
  • CCD array camera color
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Click images below for enlarged view of this Christoph Benchtop Automated Optical Inspection System

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

Yestech YTV 2050 AOI System

Automated Optical Inspection Machine Features & Benefits

Manufacturer:    Yestech
Model:   YTV 2050
D.O.M.:   –
Reference No.:   715

Specifications:

  • Throughput: 10 square inches per second > 250,000 cph
  • 22 inch by 20 inch max board size
  • 2 inch top and bottom clearance
  • Superior defect detection for components, lead, and solder
  • Dual direction auto width conveyor
  • 1 top view camera
  • 4 side view cameras
  • 1 underside camera
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Click images below for enlarged view of this Yestech AOI Machine

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

SOLD!! KOH YOUNG KY-3020T 3D Solder Paste Inspection

KY-3020 3D SPI Machine Features & Benefits

Manufacturer:   KOH YOUNG
Model:   KY-3020T
D.O.M.:   2008
Reference No.:   354

Specifications:

  • Full automatic KY-3020T packs superior Koh Young inspection technology into a compact, tabletop system
  • Delivers precise, accurate SPI results while offering portability, convenience and value
  • Key Features
    • Tabletop
    • Portable
    • Flexible
    • Fully automatic inspection on every pad
  • Programs compatible with Koh YoungÆs in-line systems,
  • Inspection Items :
    • Volume
    • Area
    • Height
    • Offset
    • Bridging
    • Shape Deformity
    • Coplanarity

Click images below for enlarged view of the KOH YOUNG 3D Solder Paste Inspection System

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

Agilent Medalist SJ50 Series 3 Automated Optical Inspection

SJ50 Series III AOI Machine Features & Benefits

Manufacturer:   Agilent Technologies
Model:   SJ50
D.O.M.:   2006
Reference No.:   353

Specifications:

  • The SJ50 is an extremely versatile platform that provides algorithms for:
    • post-paste 2D solder
    • pre and post-reflow components
    • solder joint inspection
  • Through scalable resolution, the SJ50 Series 3 is capable of inspecting the most challenging of components, including 01005.
  • Key system features:
    • Imaging chain technology changes provide increased inspection speeds, demonstrating the ability to keep up with ever-increasing line rates.
  • Algorithm advancements provide greater image clarity to low contract components, leaving users with better defect analysis capability and lower false call rates.
  • User-friendly programming, universal and self-learning algorithms, geometric pattern matching, and click and drag optical character recognition and verification.
  • The system utilizes revolutionary 3D Solid Shape Modeling (SSM) for inspection needs.
  • Operator interfaces available for Simplified and Traditional Chinese, Japanese, and English language formats.
  • Software V4.12

Click images below for enlarged view of the Agilent SJ50 Series 3 Optical Inspection System

Purchase or Ask About This Equipment
* indicates required field