Posts

2009 Mycronic My12 Pick and Place Machine

Make: Mycronic
Model:  My12
DOM: 2009
Reference No.:  243CC
Details:
  • Optical Centering
  • HYDRA Head
  • Z High Speed
  • HYDRA High Speed
  • AutoTeach
  • NO mags or feeders, just the machine
  • Includes Tray Magazine
  • Includes SW of MYLabel
  • Serviced with MYCare which Mycronic perform a PM/CAL on site every six months
Condition:  Complete and  Operational
Availability: Immediate for purchase / 2-6 weeks for shipping
Location & Shipping:  USA / FOB Origin
 

Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

FAST response, within a hour or less.

     

    2015 Pillarhouse Jade S200 MKII Selective Soldering System

    Make: Pillarhouse
    Model:  Jade S200 MKII
    Year: 2015
    Reference No.:  236NC
    Details:
    • Height: 1403mm / 55” – excluding light stack
    • Width: 1000mm / 40“
    • Depth: 1351mm / 53”
    • Board size: 457mm x 508mm / 18”x 20” (larger PCB size available upon request)
    • Edge clearance: Above / below 3mm
    • Height clearance: Above / below 40mm nominal
      Above 190mm – special application
    • Solder: Most commonly used solder types – including lead-free
    • Solder pot capacity: 8kg
    • Applicators: AP style – 2.5mm to 16mm dia.
      Extended AP style – 2.5mm to 20mm dia.
      Micro nozzle – 1.5mm to 2.5mm
      Jet-Tip style – 6mm to 20mm dia.
      Jet-Wave nozzle – up to 25mm width
      Special dedicated nozzles available upon request
    • Flux: Low maintenance Drop-Jet system. Low solids (below 8%), no clean flux, pressurised and inerted system, optional water soluble system available
    • X, Y & Z Axis resolution: 0.1mm
    • Repeatability: +/- 0.05mm
    • Nitrogen usage: 35 litres gas/min. 5 bar pressure
    • Nitrogen purity: 99.995% or better
    • Air supply pressure: 5 bar / 72 psi
    • Power supplies: Single phase + PE
    • Voltage: 208V – 250V
    • Frequency: 50/60Hz
    • Power : 4kVA
    • Power with IR preheat: 6.5kVA – Top-side
      8kVA – Top with bottom-side ring heater
    • Transport: Hand load
    • Tooling: Integral adjustable board guides, includes finger extensions and board clamps
    • Programming: PillarCOMM Windows® based ‘Point & Click’ interface
    Description

    As part of the entry-level philosophy for this system, a low maintenance solder bath and pump mechanism has been developed which moves in three axes of movement whilst not limiting access to the PCB. Solder is applied using proven technology through our AP nozzle design or custom specialized nozzles, incorporating patented spiral solder return to bath technology offering reduced solder balling potential.

    As with all Pillarhouse systems, the soldering process is enhanced by a hot Nitrogen curtain which provides an inert atmosphere. This method of soldering also assists in the prevention of oxidization and provides a local preheat to the joint, thus reducing thermal shock to localized components.

    The Jade MKII is controlled by a PC, through PillarCOMM, a Windows® based ‘Point & Click’ interface with PCB image display.
    Additionally, our PillarPAD offline package allows the operator to produce programs independently from the machine using Gerber data.


        

    Condition:  Complete and  Operational
    Location & Shipping:  USA / FOB Origin
     
    Actual Machine Photos:

    Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

    FAST response, within an hour or less.

      2014 Specialty Coating Systems Omegameter 600SMD

      Make: Specialty Coating Systems
      Model: Omegameter 600SMD
      DOM: 2014
      Reference No.: 233NC
      EQUIPMENT BROCHURE

      OMEGAMETER SMD 650 FEATURES

      • Self-contained system
      • Simple, user-friendly operation featuring integrated computer and display
      • Stair-step design allows for easier loading of parts into test cell
      • Heated test solution for improved solubility of contaminants per IPC-TM-650
      • Spray jets increase contamination removal
      • Automated process identifies end of test
      • Multiple test cell assembly sizes available

      SOFTWARE FEATURES

      • Proprietary Windows®-based software with touchscreen monitor
      • Unlimited test profiles with custom names
      • Runtime contamination graphs
      • Sort, filter and review historical test results
      • Password-protected user accounts
      • Optional LAN connectivity

      Condition: Like New Complete & Operational
      Availability: Immediate for purchase / 2-6 weeks for shipping

      Actual Machine Photos:

      Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

      FAST response, within an hour or less.

        2003 DEK Horizon 03i

        DEK Horizon 03i Screen Printer

        Manufacturer:    DEK
        Model:   Horizon 03i
        Year:   2003
        Reference No.:   211CC

        Specifications:

        • 2D inspection
        • Instinctive software
        • 110V
        • 50/60 Hz
        • Full load 15 amps
        Condition:  Complete & Operational
        Location & Shipping:  USA / FOB Origin
        Actual Machine Photos:

        Click images below for an enlarged view of this DEK Horizon Screen Printer

        Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

        FAST response, within an hour or less.

          Cencorp TR2400 PCB Router

          2001 Cencorp TR2400 Router

          Manufacturer: Cencorp
          Model:  TR2400
          Vintage: 2001
          Reference No.:   209CC
          Configuration:

          • Windows XP Operating System
          • Software Rls: 1.49
          • Dual Table
          • Fiducial Camera with Fiducial Software
          • Adjustable Light Ring
          • Vacuum Pump
          • KAVO 4444 Controller

          Condition:  Complete & Operational
          Location & Shipping:  USA / FOB Origin
          Availability:  Immediate for purchase / 2-4 weeks for shipping

          Actual Machine Photos:

          Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

          FAST response, within an hour or less!

            2007 Mirtec MV-7Xi

            Make: Mirtec
            DOM: 2007
            Model: MV7-Xi
            Condition:  Complete & Operational
            Reference Number: 205CC
            Details:

            • 5 Cameras
              Bar Code
              NG Marking
              4.2.0 Software

            Manufacturer Spec Sheet: http://mirtecusa.com/products-inlineaoi-mv7.php

            Location & Shipping:  USA / FOB Origin
            Availability:  Immediate for purchase / 2-4 weeks for shipping

            Click images below for an enlarged view.

            Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

            FAST response, within an hour or less.

              2004 Pillarhouse Jade S-200

              Make: Pillarhouse
              Model:  Jade S-200
              Year: 2004
              Reference No.:   204CC
              Details:
               
              Specifications:
              • Batch Style
                Max Board Size: 20” x 18”
                (1) Solder Pot
                Spray Fluxer
                Nitrogen Capable
              Condition:  Complete and  Operational
              Location & Shipping:  USA / FOB Origin
               
              Actual Machine Photos:

              Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

              FAST response, within an hour or less.

                2008 Speedline Aquastorm 200

                Make: Speedline
                Model: Aquastorm 200
                Reference No.:   201CC
                Vintage:  2008

                Details:

                •  24” Conveyor Width
                  Chemical Isolation Package
                  Interior Lighting
                  2 Additional E-Stops
                  Auto Standby Photocell
                  30” Entrance Incline Conveyor Extension
                  16” Exit Conveyor Extension
                  Wash Dual Hurricane Jet with 15Hp Pump
                  Rinse Dual Hurricane Jet with 15Hp Pump
                  Torrid Zone Dryer
                  Split Drain
                  Demisting Filter
                  Separate Fill Lines for Wash & Rinse
                  Final Rinse Resistivity Monitor
                  Rear Pressure Gauges for All Wet Modules
                  480V

                Condition:  Complete & Operational
                Location & Shipping:  USA / FOB Origin
                Availability:  Immediate for purchase / 2-4 weeks for shipping

                Actual Machine Photos:

                Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

                FAST response, within an hour or less.

                  2008 Speedline MPM Momentum

                  Make:  Speedline
                  Model: MPM Momentum
                  Reference No.:   177CC
                  Year:  2008
                  Details:
                   
                  The MPM® Momentum® is a fast, precise, highly reliable printer that is simple to learn and easy to use, with performance that is unmatched by any other printer in its class. It’s a cost-effective, fast ROI printing solution with innovative technology and outstanding capability.
                   
                  MPM® Momentum is a fully automatic inline screen printer featuring options such as:
                  • Programmable Squeegee Print Head
                  • Standard 29″ x 29″ Stencil Frame Size
                  • Auto Stencil Positioning
                  • Vacuum stencil wiper with solvent
                  • Plenum Sizes 10 inches, 18 inches, or 24 inches
                  • Digital probe with telecentric optics, ultrasonic board stop, LED flash lighting
                  • Programmable Board Stop – Hardstop and Non Contact Stop
                  • Board clamping:  Fixed top clamps and centernest vacuum
                  • Standard board support pin tooling – includes 10 pins
                  • Minimum PCB size – (X,Y) 2″ x 2″
                  • Maximum PCB size – (X,Y) 24′ x 20″
                  • PC controlled user interface with 17 inch flat panel monitor, keyboard and trackball
                  • Operating System:  Windows XP with Benchmark GUI software
                  • SPC Package – Data Collection System
                  • Smema Compatible, Ethernet communication
                  • CE Certification
                    
                  Condition:  Complete & Operational
                  Location & Shipping:  USA / FOB Origin
                  Actual Machine Photos:

                  Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

                  FAST response, within a hour or less.

                    2014 MIRTEC MV-7 OMNI AOI

                    NEVER RAN IN PRODUCTION LINE
                     
                    Make:  MIRTEC
                    Model: MV-7 OMNI 
                    Reference No.:   174CC
                    S/N: 
                    Year:  2014
                    Details:
                     
                     
                    Used for training only, was not used in production line.  Like New condition with just a couple of hours. 

                    In-Line 2D/3D AOI Machine:

                    • FIVE CAMERA 2D/3D In-Line AOI System
                    • Exclusive OMNI-VISION® 2D/3D Inspection Technology
                    • Exclusive FIFTEEN MEGA PIXEL ISIS® Vision System
                    • 10 Micron / Precision TELECENTRIC COMPOUND LENS
                    • Advanced 3D DIGITAL MULTI-FREQUENCY MOIRÉ Design
                    • Superior Lifted Lead Detection for Gull Wing Devices
                    • Co-planarity inspection of chips, BGAs and other height sensitive devices
                    • Integrated Ten Mega Pixel SIDE-VIEWER® Camera System
                    • Superior SIX PHASE Color Lighting Technology
                    • Precision AC Servo Drive Motor System
                    • Extremely Simple Programming and Operation
                    • The machine is a 2014 fully loaded with the same hardware and software of a 2017 unit
                    • The only difference is the lighting as now Mirtec has an next generation Blue LED DLP

                    o            This unit has LCoS Moire (Liquid Crystal on Silicone)

                    o            There are over 500 units in the field with this config

                    o            The unit is fully functional and only ran occasionally as a demo

                     

                     

                    MV-7 OMNI   3D IN LINE AOI MACHINE WITH OMNI-VISION

                     

                    MV-7-15MP-ISIS              15Mega Pixel @ 10um/pixel

                    MV-7-OMNI-VISION       Digital multi-frequency quad Moiré 3D system

                    MV-7-OMNI QHD             Quantum Hight Definition (QHD) option

                    MV-7-SVS-10MEG           10 Mega Pixel Side View Camera System

                    MV-7-OLTT                         MV-7 Off-line Teach Tool Software

                    MV-7-TRRS                         Remote Repair Software

                     
                     
                     
                    Condition:  Complete & Operational >> Never ran in production line, ran only one program for training.
                    Location & Shipping:  Canada/ FOB Origin
                    Actual Machine Photos:

                    Contact Cardinal Circuit using the form below or email sales@cardinalcircuit.com for additional information or inquiries.

                    FAST response, within a hour or less.