Model: Jade S-200
Reference No.: 170CC
Product installation requirements:
Facilities: 208V – 250V 50/60Hz 4kVA
Dimms: 55″ x 40″ x 53″
• Universally Adjustable Tooling Carrier
• Inerted Nitrogen System
• Lead Free Capability (Titanium solder pot and pump assembly)
• Solder Wire Feeder with Solder bath level sensor
• Drop Jet Fluxer
• Programming Camera
• PillarCOM Windows Software
• Internal Fume Extraction
• Integral PC with Machine Mounted Flat Screen Monitor
As part of the entry-level philosophy for this system, a low maintenance solder bath and pump mechanism has been developed which moves in three axes of movement whilst not limiting access to the PCB. Solder is applied using proven technology through our AP nozzle design or custom specialised nozzles, incorporating patented spiral solder return to bath technology offering reduced solder balling potential.
As with all Pillarhouse systems, the soldering process is enhanced by a hot Nitrogen curtain which provides an inert atmosphere. This method of soldering also assists in the prevention of oxidisation and provides a local preheat to the joint, thus reducing thermal shock to localised components.
The Jade MKII is controlled by a PC, through PillarCOMM, a Windows® based ‘Point & Click’ interface with PCB image display. Additionally, our PillarPAD offline package allows the operator to produce programs independently from the machine using Gerber data.
Height: 1403mm / 55” – excluding light stack
Width: 1000mm / 40“
Depth: 1351mm / 53”
Board size: 457mm x 508mm / 18”x 20” (larger PCB size available upon request)
Edge clearance: Above / below 3mm
Height clearance: Above / below 40mm nominal
Above 190mm – special application
Solder: Most commonly used solder types – including lead-free
Solder pot capacity: 8kg
Applicators: AP style – 2.5mm to 16mm dia.
Extended AP style – 2.5mm to 20mm dia.
Micro nozzle – 1.5mm to 2.5mm
Jet-Tip style – 6mm to 20mm dia.
Jet-Wave nozzle – up to 25mm width
Special dedicated nozzles available upon request
Flux: Low maintenance Drop-Jet system. Low solids (below 8%), no clean flux, pressurised and inerted system, optional water soluble system available
X, Y & Z Axis resolution: 0.1mm
Repeatability: +/- 0.05mm
Nitrogen usage: 35 litres gas/min. 5 bar pressure
Nitrogen purity: 99.995% or better
Air supply pressure: 5 bar / 72 psi
Power supplies: Single phase + PE
Voltage: 208V – 250V
Power with IR preheat: 6.5kVA – Top-side
8kVA – Top with bottom-side ring heater
Transport: Hand load
Tooling: Integral adjustable board guides, includes finger extensions and board clamps
Programming: PillarCOMM Windows based ‘Point & Click’ interface
Condition: Complete and Operational
Location & Shipping: USA / FOB Origin
Actual Machine Photos:
Contact Cardinal Circuit using the form below or email email@example.com for additional information or inquiries.
FAST response, within a hour or less.